Download Now
Acer Aspire R1600 Driver

Windows XP & 7 Drivers For Acer Aspire R AspireRevo is a revolution in computer size, shape, design and affordability. This nettop. Acer has boosted its nettop series in the form of the new Aspire Revo , which boasts a number of solid specs but is still missing one in. This is for an Acer Aspire Revo nettop. But maybe the a. the revo is based on a 32bit CPU so more then 3GB cant be used.


Type: Driver
210 (3.29)
Downloads: 989
File Size: 13.45Mb
Supported systems: Windows Vista (32/64-bit), Windows XP (32/64-bit), Windows 8, Windows 10
Price: Free* [*Free Registration Required]

Download Now
Acer Aspire R1600 Driver

Acer Aspire R1600 Drivers Download

Unseat but do not fully remove the four screws Acer Aspire R1600 the heat sink to the motherboard. These screws go through the board and into the case, so it's really only the attachment to the case that you need to be concerned about.


You can try to remove them fully if you want, but it's not necessary, and they have springs under them that can easily get lost if you take them too far Acer Aspire R1600. Just back them off enough to release them from the case. If they come out completely you went a turn too far. When you've got them taken out far enough, the heat sink itself should remain attached to the motherboard by its Acer Aspire R1600 sink compound, but when I did this I managed to remove it completely.

Acer Aspire R user manuals download

Don't break it free if Acer Aspire R1600 don't have to though, since as mentioned the point here is just to release the screws from the case. I tried to keep it pressed against the motherboard throughout the process, but some loosening and movement of the heat sink was inevitable.

Now that all of the screws have been removed the four in the corners as well as those going through the heat sink and into the case you should be able to Acer Aspire R1600 the motherboard free from the top edge. If it won't come loose, undo the heat sink screws a Acer Aspire R1600 more and try again.

Subscribe to RSS

You Acer Aspire R1600 also need to pry back the top edge of the case a little to let the card reader slot, eSATA port, etc. Free the board up to confirm that it's removable, but don't yank it right out of the case just yet.

  • Lawrlwytho gyrwyr ar gyfer Acer Aspire R
  • Acer R PC Desktop - Customized for sale online eBay
  • Acer Aspire R NOt Connecting to the Internet via WLAN Tech Support Guy
  • DPD Couriers Depot Finder
  • Post navigation

If Acer Aspire R1600 have an internal wifi card which I assume all Revos dothere will be two wires coming off the card down in the lower left corner that go to the two antennae embedded in the case. If you are really good working on this scale, feel free to disconnect them from the card to make things easier, and simply lift the motherboard out of the case.

Acer Aspire R Series AC Adapter 65Watt 19V A Equivalent

I am not so adept at small connections so I left them attached, and instead just gently rotated the board up and out of its position, flipping it while keeping Acer Aspire R1600 two wires oriented in that same corner. Then I just laid the board upside-down in the case where it was.

You now have access to the four screws holding the HD tightly against the motherboard. Remove them. Once the screws are removed, flip Acer Aspire R1600 board again while being mindful of the antenna wires to get access to the drive, which can be easily dislodged from the SATA connector.

Pop in your new HD. How you prepare it i. Reverse all of the above steps to put things back together. Two of the heat sink screws sit right beneath the vanes of the fan, so you need to make sure that these are seated properly or you'll hear some funny noises Acer Aspire R1600 next time you start your Revo. Forgetting Acer Aspire R1600 can also cause some funny noises, and probably charred processor smells, but that won't be evident until some time later.

Acer Aspire Revo ARUH Mini Desktop - video dailymotion

Remember the proper orientation from step 6. Take a good long look at the pins and the connector before starting this step so you understand how they need to be aligned. This is really easy to get out of alignment because it's in Acer Aspire R1600 hard-to-see spot. If you find it's not going down without pushing pretty hard, you're probably doing it wrong and bending some pins.


It should seat with a little bit of resistance, but not much. Do not buy acer aspire revo I must agree with those who Acer Aspire R1600 you just got a bad unit. I and both of my sons Acer Aspire R1600 one of these - 2 son got one first and his brother and I were both sufficiently impressed that we got one. All are in use as home theater PC's, although the funny part is we are each running a different OS - my youngest is running Linux Mint 64 bit, his brother is running Ubuntu 32 bit, Acer Aspire R1600 right now I'm just running XBMC Live, though I'm seriously thinking of switching to ElementOS which is basically a Ubuntu derivative with a "10 foot interface" once it's out of beta.

In any case, all three of these are running like champs and the only issue we've all experienced is that when using a HDTV as the display, there no way to correct for overscan. I know, Acer Aspire R1600 you get the updated nvidia drivers you are supposed to be able to run nvidia-settings and there is supposed to be an Overscan Compensation slider, but it isn't there.

No, it's not that we aren't looking in the Acer Aspire R1600 place - we've found screenshots of where it's supposed to be and trust me, it isn't there!

Other Drivers