ASRock H61M-GS HD Audio Driver
CH HD Audio (Realtek ALC Audio Codec) Intel® H61 Chipset. H61M-GS Other Motherboard without XFast USB Technology. Have an iK. Been looking for a guide to my bios, uefi, but no luck. I find guides but their related to other mobo manufactures. Some of the. H61M-GS. Solid Capacitor for CPU Power; Supports Intel® K-Series CPU; Supports Dual Channel DDR3 CH HD Audio (Realtek ALC Audio Codec).
|Supported systems:||Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP|
|Price:||Free* [*Free Registration Required]|
ASRock H61M-GS HD Audio Driver
Do not over-tighten the screws! Doing so may damage the motherboard.
Unplug the power cord from the wall socket before touching any component. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like.
Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. Hold components by the edges and do not touch the ICs.
Download ASRock H61M-GS Realtek HD Audio Driver Beta for Windows 8, Windows 8 64 bit
Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component. Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged.
ASRock H61M-GS HD Audio 1.
Open the socket: Step Disengaging the lever by depressing down and out on the hook to clear retention tab. Rotate the load lever to fully open position at approximately degrees.
Rotate the load plate to fully open position at approximately degrees. Step 2.
ASROCK H61M-GS USER MANUAL Pdf Download.
It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. This cap must be placed if returning the motherboard for after service.
Insert the Pin CPU: Hold the CPU by the edge where is marked with black line. Locate Pin1 and the two orientation key notches.
Carefully place the CPU into the socket by using a purely vertical motion. Verify that the CPU is within the socket and properly mated to the orient keys.
Step 4. Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load plate, engage the load lever.
Please adopt the type of heatsink and cooling fan compliant with Intel Pin CPU to ASRock H61M-GS HD Audio heat. Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dissipation. Ensure that the CPU and the heatsink are securely fastened and in good contact with each other.
- H61M-GS Bios Hard Disk Drive
- de moederborden specialist alles in eigen voorraad
- ASRock- Asrock H61M-GS- ASMBH61MGS- - Solid Capacitor for CPU power.- Supports Intel® K-Series
- ASRock H61M-GS BIOS
- About this product
- ASRock H61M-GS Motherboard Core i7/i5/i3 Socket 1155 H61 mATX Gigabit LAN
For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Below is an example to illustrate the installation of the heatsink for Pin CPU.
Trouble overclocking ASRock H61M/U3S3 Tom's Hardware Forum
Apply thermal interface material onto center of IHS on the socket surface. Apply Thermal Interface Material Step 2. Place the heatsink onto the socket. Step 3. Align fasteners with the motherboard throughholes. ASRock H61M-GS HD Audio the fastener clockwise, then press down on fastener caps with thumb to install and lock.