Asus AP2400R-E2 ASWM Driver
If you are looking for the instruction manual: Asus APR-E1 - you have come to the right place. On this page you can download it for free. For details about. LaCie 2big Network Update, Asus APR-E2 ASWM Patch , Asus RSE2/CS3 ASWM Patch , ECS NFORCE4M-A (PCBX) BIOS 07/07/ ASUS Server Management Software (ASMA+ASWM), $ Asus TSE2 Pentium 4 Server System, Asus Intel motherboard (MHz FSB) Intel Pentium 4 . APR-E1, Dual Xeon up to GHz Mhz 1M cache pin DIMM.
|Supported systems:||ALL Windows 32x/64x|
|Price:||Free* [*Free Registration Required]|
Asus AP2400R-E2 ASWM Driver
Re-connect the 4-pin power plug to the connector inside the Asus AP2400R-E2 ASWM. When re-connecting the power plug, place the PCI cage close enough to avoid pulling the power cable. Before re-installing the PCI cage into the chassis, check that all cables on the PCI cage bay are properly connected and routed.
Cables on the PCI cage bay Take note of the two pegs on the PCI cage bay. These pegs should match the holes on the cage to make sure it fits Asus AP2400R-E2 ASWM place. PCI cage pegs Chapter 2: Position the PCI cage into the bay making sure that the pegs go into the holes on the front Asus AP2400R-E2 ASWM the cage, and the dents on the rear part match those on the chassis. Ensure that the PCI cage card golden connectors completely fit the slot.
ASUS APR-E2 SERVICE MANUAL Pdf Download.
If properly installed, the top of the PCI cage aligns with the top edge of the rear panel. Turn on the system and change the necessary BIOS settings, Asus AP2400R-E2 ASWM any. Assign an IRQ to the card.
Refer to the following tables. Install the software drivers for the expansion card.
Weekly News & Update
Hold down the heatsink lightly and twist each of the four screws with a Philips cross screwdriver just enough to attach the heatsink to Asus AP2400R-E2 ASWM motherboard. When the four screws are attached, tighten them one by one to completely secure the heatsink.
Connect the thermistor cable to the 2-pin cable from the mid-fan board. Follow steps 1 and 2 to install the second CPU heatsink.
The Asus AP2400R-E2 ASWM CPU heatsink does not have a thermistor cable. Heatsink for CPU2 Chapter 2: These sockets support up to 12GB system memory using 2. Installing a single DIMM into any other socket would not work. The following table lists the DIMM socket pairs and the memory modules that you can install.
Make sure th use only the specified DIMM types for stable system operation. Failure to do so may cause severe damage to both the motherboard and the components.
Follow these steps to install a DIMM. Unlock a DIMM socket by pressing the retaining clips outward.
APR-E2(AS8) Server & Workstation ASUS
Unlocked retaining clip 3. Locked retaining clip 2.
Simultaneously press the retaining clips outward to unlock the DIMM.