Asus K8N-DL Driver
View and Download Asus K8N-DL user manual online. Asus Computer Hardware - Motherboard User Manual. K8N-DL Motherboard pdf manual download. Asus Asus-K8N-Dl-Users-Manual asus-k8n-dl-users-manual asus pdf. ASUS K8N-DL Motherboard Memory. Maximum Memory 24GB Memory Slots 6 (3 banks of 2) Install in pairs non-removable base memory 0MB. MB ASUS.
|Supported systems:||Windows 2008, Windows XP, Windows Vista, Windows 7/8/10|
|Price:||Free* [*Free Registration Required]|
Asus K8N-DL Driver
This port connects a microphone. Refer Asus K8N-DL the audio configuration table below for the function of the audio ports in 2, 4, 6, or 8-channel configuration. This 9-pin communication port os for pointing devices or other serial devices. Insert one end of the cable to this connector, then connect the other end to the signal connector at the Asus K8N-DL of the floppy disk drive.
Orient the red markings on the floppy ribbon cable to PIN 1. K8N-DL Floppy disk drive connector 2. If you install two hard disk Asus K8N-DL, you must configure the second drive as a Asus K8N-DL device by setting its jumper accordingly.
Refer to the hard disk documentation for the jumper settings. This prevents incorrect insertion Asus K8N-DL you connect the IDE cable. Hardware information 5.
Connect the fan Asus K8N-DL to the fan connectors on the motherboard, making sure Asus K8N-DL the black wire of each cable matches the ground pin of the connector. Lack of sufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! Never connect a 1 3 9 4 c a b l e to the USB connectors.
Doing so will damage the motherboard!
Connect the IEEE module cable to this connector, then install the module to a slot opening at the back of the system Asus K8N-DL. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. The system may become unstable or may not boot Asus K8N-DL if the power is inadequate.
See the table below for details. For Power Supply with pin Power Connector 1 0.
ASUS K8N-DL Motherboard Memory
Hardware information 1 2. Connect one end of the chassis intrusion sensor or switch cable to this connector.
The chassis intrusion sensor or switch sends Asus K8N-DL high-level signal to this connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. Remove the jumper caps only when you intend to use the chassis Asus K8N-DL detection feature.
Refer to the connector description below for details. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the Asus K8N-DL is Asus K8N-DL sleep mode. The speaker allows you to hear system beeps and warnings. Reset button Blue 2-pin RESET This 2-pin connector is for the chassis-mounted reset button for system reboot without Asus K8N-DL off the system power.
K8N-DL Servers & Workstations ASUS Global
Hardware information This chapter describes the power up sequence, the vocal POST messages, and ways of shutting down the system. After making all the Asus K8N-DL, replace the system case cover. Be sure that all switches are off.