ADLINK PCI-9114A-DG Driver
Details. ADLINK PCIA-DG CH bit kS/s Normal Gain Multi-Function DAQ Card. MPN: PCIA-DG. Details. Back. PCIA-DG ADLINK Technology Data Logging & Acquisition 32CH 16BIT KS/s A/D NORMAL GAIN DAS datasheet, inventory & pricing. © ADLINK Technology, Inc. All Rights Reserved. Up to kS/s sampling rate (PCIA-DG and x1, x2, x4, x8 (PCIDG and PCIA-DG).
|Supported systems:||Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10|
|Price:||Free* [*Free Registration Required]|
ADLINK PCI-9114A-DG Driver
Windows 95 DLL: Include device drivers and shared libraries for Linux. Please refer the PDF manual files under. The above software drivers are shipped with the board. Please ADLINK PCI-9114A-DG to the Software ADLINK PCI-9114A-DG Guide for installation procedures. Introduction 5 16 1.
PCI-9114A-DG - ADLINK TECHNOLOGY
You can install and use them without a license. It needs a license.
A license is needed to use the drivers. There are several software packages on the market, which can provide the OPC clients. Follow the steps carefully.
Check what you have section 2. Save the shipping materials and carton in case you want to ship or store the product in the future.
Therefore, the card should be handled on a grounded anti-static mat. The operator should be wearing an anti-static wristband, grounded at the same point as the anti-static ADLINK PCI-9114A-DG.
Welcome to Acceed
Inspect the card module carton for obvious damages. Shipping and handling may cause damage to your module.
Be sure there are no shipping and ADLINK PCI-9114A-DG damages on the modules carton before continuing. After opening the card module carton, extract the system module and place it only on a grounded anti-static surface with component side up. Again, inspect the module for damages. Press down on all the socketed IC's to make sure that they are properly seated. Do this only with the module place on a firm flat surface. You are now ready to install your ADLINK PCI-9114A-DG.
Installation 9 20 2. B1 Figure 2. A2 Figure 3.
A2 10 Installation 21 2. These system resource assignments are done on a board-by-board basis.
PCI Series–Multi-Function DAQ–ADLINK
ADLINK PCI-9114A-DG is not suggested to assign the system resource by any other methods PCI slot selection The PCI card can be inserted into any ADLINK PCI-9114A-DG slot without any configuration modification to the system resources. Please note that the PCI system board and slot must provide bus-mastering capability to operate at its optimum level Installation Procedures 1. Turn off your computer. Turn off all accessories printer, modem, monitor, etc.
Remove the cover from your computer.
Select a bit PCI slot. Before handling the PCI cards, discharge any static buildup on your body by touching the metal case of ADLINK PCI-9114A-DG computer.
NuDAQ PCI(A) DG/HG - PDF
Hold the edge and do not touch the components. Position the board into the PCI slot you have selected.
Secure the card in place at the rear panel of the system. Installation 11 22 2.
Please refer to the Software Installation Guide for step-by-step ADLINK PCI-9114A-DG procedures. The pin assignment for CN1 is illustrated in Figure 4. Pin Assignment of CN1 Legend: