Download Now
Asrock H61M-GE AppCharger Driver

Thank you for purchasing ASRock H61M-GE motherboard, a reliable motherboard . ASRock website: View and Download ASROCK H61M-GE brochure & specs online. H61M-GE Motherboard pdf manual download. Instant Flash, APP Charger, SmartView. Asrock H61M-GE Extreme Tuning Utility free download. Utility (AXTU) - Instant Boot - ASRock Instant Flash - ASRock AIWI - ASRock APP Charger - SmartView.


Type: Driver
464 (3.4)
Downloads: 791
File Size: 27.13Mb
Supported systems: ALL Windows 32x/64x
Price: Free* [*Free Registration Required]

Download Now
Asrock H61M-GE AppCharger Driver

Rotate the load lever to fully open position at approximately degrees. Rotate the load plate to fully open position at approximately degrees.

Download ASRock AppCharger Driver

Step 2. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap.

This cap must be placed if returning the motherboard for after service. Step 3. Insert the Pin CPU: Hold the CPU by the edges where are marked with Asrock H61M-GE AppCharger lines. Asrock H61M-GE AppCharger Pin1 and the two orientation key notches. Carefully place the CPU into the socket by using a purely vertical motion. Verify that the CPU is within the socket and properly mated to the orient keys.

ASRock H61M-GE - motherboard - micro ATX - LGA Socket - H61 Specs - CNET

Step 4. Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load plate, engage the load lever. Secure load lever with load plate tab under retention tab of load lever. Below is an example to illustrate the installation of the Asrock H61M-GE AppCharger for Pin CPU.

ASRock H61M-GE, LGA 1155, Intel Motherboard

Step 1. Apply thermal interface material onto center of Step 2.

Place the heatsink onto the socket. Ensure IHS on the socket surface. Align fasteners with the motherboard throughholes.

Rotate the fastener clockwise, then press down on fastener caps with thumb to install A Step 5. Step 6. Repeat with remaining fasteners.


If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard. Connect fan header with the CPU fan connector on the motherboard.

Buy Asrock H61m-Dgs R Skt Intel H61 Matx Motherboard H61M-DGS R2,0 GAME

Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other Asrock H61M-GE AppCharger. Please be noticed that this motherboard supports Combo Cooler Option C. Otherwise, it will operate at single channel mode.


If you install only one memory module or two non-identical memory modules, it is unable to activate the Dual Channel Memory Technology. It is not recommended to install them on this motherboard. Unlock a DIMM slot by pressing the retaining clips outward.


PCIE slots: Installing an expansion card Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged.

Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Remove the system unit cover if your motherboard is already installed in a chassis. Remove the bracket facing the slot that Asrock H61M-GE AppCharger intend to use. Keep the Step 4.

Other Drivers